In order to print the ring sizer above, be sure that your printer
is set to 100%. In other words, make sure that you have not reduced the print
size in 'page set up.' You can verify that the sizer printed correctly by
measuring it with a ruler; it should measure from left to right: 3 3/8 inches. You can 'right click' on the image
above and select "Print Picture" from the drop down menu.
Once you have printed the sizer, you may cut it out and use it or try
the following directions to find your ring size:
- Wrap a piece of loose string around your finger. Be sure to allow for the
size of your knuckle.
- With a pen, mark the point on the string where the end meets.
- Using the chart, place the end of the string on the left hand line
next to the letter "A" and stretch the string along the sizer
toward the numbers.
- The pen mark on your string should line up with a number to indicate your
ring size.
Below is a chart of ring sizes for the convenience of our international customers.
|
